M20 × 2.5 tap drill size
17.50 mm drill — or 11/16 (0.6875 in) = 78% thread
M20 coarse series, 2.5 mm pitch. Tap drill Ø = nominal − pitch = 20 − 2.5 = 17.50 mm (≈77% thread, the standard chart value).
| Drill | Size | Thread % |
|---|---|---|
| 17.50 mm | 0.6890 in | 77% |
| 11/16 (inch) | 0.6875 in / 17.46 mm | 78% |
Rounding to your nearest stock drill moves the thread percentage only a few points. Cut taps only — roll-form taps need a larger hole. Verify before you cut.
Need a different thread percentage? Open the tap drill calculator · Metric tap chart · All calculators